幸运飞艇计划有软件吗

  • 大区经理:张经理:18663767795
  • 大区经理:陶经理:13011716033
  • 技术咨询:詹经理:18663767799
  • 传真:0531-68850070
  • 地址:山东省济南市历城区工业北路58号恒大城K栋3-3109室
新闻资讯当前位置:幸运飞艇计划有软件吗-新闻资讯
    喷淋清洗机:超声波清洗机除油操作过程
    2019-7-31 16:33:32
    超声波清洗机是一种清洗工件,广泛应用于五金行业,清洗效果非常干净。通常使用除了石油和锈防锈,例如:一个大型硬件部件制造商,硬件部分的日产量是30000,手动清洗这大量的特殊的努力,不仅清洁时间很长,和清洁不彻底,特别是在污垢清洗不到位的差距!如果使用超声波清洗机,清洗五金零件的效率提高,除油除锈效果更清洁。
    Ultrasound cleaning machine is a kind of cleaning workpiece, which is widely used in the hardware industry. The cleaning effect is very clean. Usually used in addition to oil and rust and rust, such as: a large hardware parts manufacturer, the daily output of hardware parts is 30,000, manual cleaning of this large number of special efforts, not only a long time, and cleaning is not complete, especially in the dirt cleaning gap in place! If the use of ultrasonic cleaning machine, cleaning hardware parts efficiency! The oil removal and rust removal effect is cleaner.
    喷淋清洗机
    Spray cleaner
    超声波清洗机脱油操作流程:
    Deoiling operation flow of ultrasonic cleaner:
    1. 将油污金属部件、铝块、金属、轴承、链条、模具放入清洗筐内,再放入清洗槽内
    1. Put the greasy metal parts, aluminium blocks, metals, bearings, chains and moulds into the cleaning basket and then into the cleaning tank.
    2. 加入水和一定量的去油剂
    2. Adding water and a certain amount of deoiling agent

    3、按下开关,超声波清洗机开始工作,清洗一段时间后,再放入另一个干燥槽中烘干,烘干一段时间后,将物体、清洗篮一起取出。

    喷淋清洗机

    3. Press the switch and the ultrasonic cleaner starts to work. After cleaning for a period of time, it is dried in another drying tank. After drying for a period of time, the object and the cleaning basket are taken out together.
    4、停机时,注意保养
    4. Pay attention to maintenance during shutdown
    采用超声波清洗机可缩短除油除锈时间,提高除油除锈质量,提高除油除锈工艺。特别适用于精密零件和复杂形状的五金零件。不易清除表面油污的金属、轴承、链条、模具等具有明显的除油除锈效果,克服了手工清洗对零件的损坏。超声波除油是基于空化原理,超声频率为40KHz为高频超声。超声波作用下,加上除油剂的化学作用,产生气泡瞬间,由于受到压力的作用,气泡压缩破碎而分散,同时产生冲击波,这种冲击波可以清洗五金零件表面,使污迹脱落。
    The use of ultrasonic cleaning machine can shorten the time of oil and rust removal, improve the quality of oil and rust removal, and improve the process of oil and rust removal. Especially suitable for precision parts and complex shape hardware parts. Metals, bearings, chains and moulds that are not easy to remove greasy contamination on the surface have obvious effect of oil and rust removal, which overcomes the damage of parts caused by manual cleaning. Ultrasound oil removal is based on the principle of cavitation. The frequency of ultrasound is 40KHz and high frequency ultrasound. Under the action of ultrasonic wave and the chemical action of degreasing agent, the bubbles are produced instantaneously. Due to the action of pressure, the bubbles are compressed and fragmented. At the same time, shock wave is produced. This kind of shock wave can clean the surface of hardware parts and make the stain fall off.
    喷淋清洗机
    Spray cleaner
    除油除锈效果如何?事实上,除油除锈的效果与零件的尺寸、形状的复杂程度、零件的位置、表面油的成分、是否添加除油剂等密切相关。超声波清洗机除油除锈的频率一般为40KHz。零件的位置非常重要,零件在清洗槽内要旋转或旋转,方便其表面的每一个零件都能暴露在超声波辐射下,从而达到更好的清洗效果。
    What is the effect of oil and rust removal? In fact, the effect of oil and rust removal is closely related to the size of the parts, the complexity of the shape, the location of the parts, the composition of the surface oil, whether or not the oil remover is added. The frequency of oil removal and rust removal of ultrasonic cleaner is generally 40 KHz. The position of the parts is very important. The parts should rotate or rotate in the cleaning tank, so that every part on the surface of the parts can be exposed to the ultrasonic radiation, so as to achieve better cleaning effect.
    以上是喷淋清洗机制造商为大家整理的相关内容,想要了解更多内容,欢迎访问网站:http://www.jaqno.cn
    The above is the relevant content of spray cleaner manufacturers for you. For more information, please visit the website: http://www.jaqno.cn.
幸运飞艇走势规律技巧 幸运飞艇计划有软件吗 幸运飞艇能赢钱吗 幸运飞艇就是赢不了 幸运飞艇平台登录 幸运飞艇计划软件五码 幸运飞艇五码计算方法 幸运飞艇怎么看规律 幸运飞艇计划手机版 幸运飞艇杀号公式图